Flat Type Newel Caps
Most of the caps on this page are available
in 90-94mm square, in Oak, Pine, Yellow poplar and Sapele.
Stock items (ST*) usually dispatched in 7-14 days.
They can also be supplied in larger sizes,
made to order.
They can be purchased using Paypals secure
server, just select the add to cart button alongside the relevant cap.
If you wish to order by post and pay using a cheque, please select the how
to order link below.
If you would like a quote on a made to order item, please select the how to
quote link below.
NOTE:
Owing to Timber price increases, please take the prices displayed on the website as a guide.
On enquiry I will provide a firm quote before accepting the order.
Flat Caps
|
|
FC1 Made to measure These caps can be made to measure in a timber of your choice. |
|||||||||||||||||||||||||||||||||||||||||||||
Size 90-94mm
|
Size 90-94mm
|
They can be made in sizes ranging from
FC2
and FC3 Are also available
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|
FC2TP |
|||||||||||||||||||||||||||||||||||||||||||||
Size 90-94mm
|
Size 90-94mm
|
Size 90-94mm
|
|||||||||||||||||||||||||||||||||||||||||||||
|
FC3DB |
FC3TP |
|||||||||||||||||||||||||||||||||||||||||||||
Size 90-94mm
|
Size 90-94mm
|
Size 90-94mm
|
|||||||||||||||||||||||||||||||||||||||||||||
Flat cap FC1SP is usually secured into a 32mm hole and is supplied with a suitable sized spigot, but can be supplied with a flat back FC1 enabling it to be glued and nailed into position. The square flat caps FC2 and FC3 are provided un drilled and can be secured on-site by nailing and glueing.The square flat caps are also supplied pre-drilled either with a matching timber pellet TP, which is glued in place after screwing and gluing the cap onto the post, then trimmed flush with a sharp chisel. Or they can be supplied with a decorative domed button screw cover in a matching timber as in flat cap FC2DB above. |